1. Project management

As usual course of action in Fab Academy, you have most likely attended the bootcamp and your first online lecture. Now set your timer and 'git' started.

First call of action is to recall the list of tasks, usually mentioned towards the end of the lecture, but if for any reason you haven't been able to recall or register Helllo there what's up with you all

Useful links

• Jekyll
• Google
• Markdown

Code Example

Use the three backticks to separate code.

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);                       // wait for a second
  digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);                       // wait for a second
}

Gallery

Video

From Vimeo

Sound Waves from George Gally (Radarboy) on Vimeo.

From Youtube

3D Models

Use HTML

You may also embed HTML in your markdown files

Try having a seperator line